Archive for the ‘Bathroom Plumbing’ Category

How to Unclog a Toilet Without Calling a Plumber

How to unclog a toilet is one of the most common plumbing problems searched for on Google. The good news is that anyone can learn how to unclog a toilet without calling a plumber.

Article Body:

Toilets are one of the things those of us in modern society tend to take for granted, until they don’t work. Since most of us have eliminated the outhouse as an option (no pun intended), when our toilets don’t work things can get ugly in a hurry. The good news is that unclogging a clogged toilet is something anyone can learn to do.

There are a lot of different shapes and styles of toilets but, with a few exceptions, they all work about the same. Water is released from the tank (many commercial toilets use a special valve instead of a tank) into the bowl to flush the waste into your drainage piping. Basically pretty simple, right?

The two main problems that happen with toilets are the toilet running (the water not shutting off after flushing) and the toilet bowl plugged (not draining or stopped up). While a running toilet wastes water and can be annoying, if you have a toilet bowl plugged it’s a little more urgent. On a scale of 1 to 10, maybe a 12! In fact, one Google search term study calls most people’s #1 plumbing problem a plugged toilet.

Anyone can learn how to unclog a toilet. It just takes a little patience and the right tools. The first thing you need to fix a plugged toilet is a toilet plunger. These are a little different from a sink plunger, which looks like a rubber bowl on a stick.

A toilet plunger is designed specifically to direct the force into the waste outlet of the plugged toilet bowl. The business end of a toilet plunger looks sort of like a ball with an opening to fit into the waste outlet of the toilet. One type that is very effective has an accordion like design and is all plastic, including the handle.

The way a toilet plunger works is by filling up with water and then pushing that water through the stopped up drain. When unclogging a clogged toilet, the idea is to plunge up and down a couple of times so the plunger fills with water and then jam the open end, sometimes called a force cone, into the waste outlet in the plugged toilet and start plunging. You may have to pump the plunger up and down several times to clear the blockage.

When you are learning how to unclog a toilet you may need to be fairly aggressive with the plunger. The key is to force the water in the plunger through the waste outlet of the toilet, dislodging the blockage in the process. If you don’t splash a little out of the bowl you probably aren’t plunging hard enough. Ever wonder why plumbers charge so much?

This will usually be all you need to do to fix a plugged toilet. Sometimes, however, a plunger just won’t do the trick. If you’ve plunged a while with no success you might need to try another approach. It’s time to pull out the closet auger.

A closet auger is a special tool that can be used to clear an especially stubborn plugged toilet. A closet auger has a short drain cable, or snake, inside a metal tube that is bent on the end to aim the cable into the waste outlet of a toilet bowl. The cable is just long enough to get through the toilet and is connected to a handle the same length. You can get one of these at your local hardware store for as little as $10.

The way to use a closet auger is to pull the handle all the way out, insert the business end into the outlet of the toilet bowl that’s plugged and crank it down into the bowl, making sure the cable goes into the drain. When the bowl drains, flush the toilet while you’re pulling the cable back to help clean the cable. It’s a good idea to flush some toilet paper through a couple of times before you put your auger away just to be sure.

With the growing focus on water conservation more and more communities are requiring toilets that use less water per flush. In spite of the best efforts of the toilet manufacturers to increase performance, this is likely to continue to make our most common plumbing problem a plugged toilet. So you might as well go ahead now and learn how to unclog a toilet yourself. You’ll be glad you did.

Bryan Stevens is a Licensed Master Plumber with a knack for teaching

homeowners how to do their own basic plumbing repairs themselves. He has an amazing mini-course

called “How To Unclog A Toilet And Other DIY Plumbing Tips”. To claim your FREE copy,

visit: How To Unclog A Toilet

Choosing a DIY Shower System

There is a wide variety of shower systems available but your choice will be largely governed by your household water system.

Mixer shower

The simplest form of shower is the bath mixer shower, where a mixer tap is connected to a hose and shower attachment. The water temperature and force is controlled by the hot and cold taps on the mixer unit. Although this system is inexpensive and has the advantage of not needing any additional plumbing, the water pressure is affected by water being used in other parts of the building.

Power shower

A power shower uses a powerful electric pump to increase the rate of the water flow to the showerhead from the water cistern. Due to the fast flow of water you must ensure the waste pipe is large enough to drain the water from the shower tray, as it will receive around 27 litres of water a minute. It is recommended that a 50mm (2in) diameter waste pipe be installed. A power shower is not suitable if the water is supplied from a combination boiler under mains pressure

Electric shower

Supplied as a wall unit it uses an electric element to heat the water. The unit is plumbed into the cold water supply and

Guide to Installing a New Toilet

One of the most time-consuming bathroom jobs for a plumber is that of a complete toilet installation. While plumbers are good at it and have certainly got a lot of experience under their belts, there are many do-it-yourselfers who take this challenge. And if you ask me, it’s not really that difficult as it seems, especially if you know what each part is for and where it would go. This article will guide you through a complete toilet replacement in some easy-to-remember steps.

For simplicity, this article will discuss only those toilets that come with a separate tank that is installed above the toilet bowl. If you have got any instructions manual from the manufacturer, this would be the time to go through it thoroughly. And it’s always better to have an illustrated diagram of the parts with you.

To begin with, turn off the water supply to the tank and flush it twice to make sure that all the water goes down the drain. To promote safety, use a sponge to dry leftover water remaining in the tank or bowl.

Open the nuts and bolts that connect the tank with the bowl and the water supply line. Upon doing that, it will be easy to remove the tank. In case there is an elbow between the tank and the bowl, you will need to remove that first. Then, open the screws that are used to mount the tank to the walls. Do this step with extra care and hold the tank tightly in you hands, so that it doesn’t fall when detached from the wall.

Now you have to remove the bowl, which is attached to the floor with some nuts and bolts. These bolts are usually hidden under caps, which you can take off by inserting a screwdriver beneath the caps and pushing them in the upward direction. The screw-driver can be wrapped in protective tape so that it doesn’t damage the smooth surface of the toilet-bowl. Following the removal of the cap and nuts, the toilet bowl will be secure in its spot because of a seal with the floor. So rock it back and forth slowly and the seal would eventually break. Now you can take the bowl wherever you want but it would be a small weightlifting exercise.

Once the bowl is removed from its place, the toilet flange will be in the open. Shove some old, abandoned clothes inside so sewer gases would not escape into your house; This also insures that removable parts don’t come off the flange. Now bring the new toilet and get ready to install it; you will just need to put everything back in its place in the reverse order.

Take out the clothes from the flange and apply some plumber’s putty to the bottom of the bowl, where it will come into contact with the floor. Now place the bowl such that its outlet would come exactly above the flange. The bolts won’t fit in their place if you place the bowl wrongly. Once you have put it correctly into its position, ensure that it is in level with the floor. Next, place the bolts and nuts where they belong and adequately tighten them. Put the caps on the bolts and viola – the new toilet is now in ideal shape. Next, line the tank up with the wall and put everything else in place in exact reverse order you removed it before. Now wash your hands, clean up the mess, and welcome your brand new toilet!

Need more information on toilets and plumbing fixture installation? Read more articles by Scott Rodgers, master plumber, at http://eLocalPlumbers.com

Plumbing and Shower Installations – Choosing the Right Shower for Your Home

Maybe you wish to add an elegant walk-in shower to your home or like the idea of the latest high tech shower enclosures. Whatever your style there are many options available to you and your plumber or bathroom fitter can help you decide what is possible with your installation and present plumbing system.

Your plumber will be able to advise you on the water pressure available to you and how this will affect your options. Generally speaking, most showers require a minimum water pressure of 0.1 bar though most manufacturers recommend anything from 5 to 5 bar water pressure. Thus ensuring that the carefully designed shower heads deliver water in the way they were designed. Choose fittings such as shower heads and thermostatic controllers that work with the maximum water pressure you have at your disposal.

Should you choose a fixed head or an adjustable rail system? Many people like the clean look that fixed shower heads give. The supply pipe work is hidden behind the shower in a ?wet wall? giving a contemporary and clean look. The downside is that the head is set at a fixed height and probably not at the optimum height for everyone in the household. An adjustable rail will allow the shower head to slide up and down a rail fixed to the wall. This allows the shower head height to be set at the optimum height for most people.

Many modern shower heads now incorporate an adjustable dial which enables the user to set different spray patterns and body jets can be added to a shower system to create an ?all over? experience. The choices are many for todays homeowner consumer.

Period style shower heads too are readily available to suit many shower thermostatic and none thermostatic systems. The traditional English shower rose is experiencing a new blast of popularity. Its combination of a drenching but less pummelling shower and stylish looks appeal top many. But take note that some of the larger shower roses (and these can available up to 300mm) require a minimum pressure of 3 bar.

If you are unsure about the pressure available to you then your plumber will be able to advise you on this and your options regarding raising the water pressure artificially through the fitment of a pressure pump. Remember too that hot water pressure supplied by combination boilers is dependant on the mains water pressure and the water pressure at your shower head will be this pressure. Conventional, non-combi set ups allow for raising of water pressure more easily.

As always If your bathroom project is done by an unqualified plumbing contractor without a written contract then you may experience problems. If your plumber does not hold current insurances which may be needed in the event of creating a water leak then you may well find yourself uninsured and out of pocket and liable for water damage to adjacent properties.

Using a reputable tradesmen source like www.homepromatch.com will ensure that you connect with qualified and insured plumbers and bathroom fitters, rated and recommended by other local homeowners.

An experienced trade professional, Nigel Beswick writes home improvement and maintenance articles for www.homepromatch.com, an online resource connecting homeowners with vetted and customer recommended home improvement tradesmen and builders throughout the UK.


Find home improvement articles to save you time and money, get helpful tips and advice and design inspiration at http://www.homepromatch.com/Articles/List.aspx

Replacing a Bathroom Sink

TOOLS

? Tape measure

? Pipe wrench

? Pry bar

? Utility knife

? Adjustable wrench

? Screwdriver

Materials

? Replacement Sink

? Replacement Faucet

? Sink Trap

? Tail piece

? Supply lines

? Silicone caulk or plumber’s putty

Teflon

Electrical Tips-how to install a shower:cubicle|tray|Tiles|plumbing and waste

Handyman tips-how to install a shower

Having a shower is both luxurious and environmentally friendly at the same time because it helps to save water and is good for the environment. Because of the design of most shower cubicles these days, the shower enclosure can be fitted in most small spaces. To begin installing a shower cubicle a basic understanding of plumbing and electrical installation

How to fix clogged toilet

Clogged toilet is a big issue we all want to avoid. The knowledge of how to deal with clogged toilet can help you very much in saving lot of money and frustration. There are several hardware tools that can be found at any store and will help you in solving your clogged toilet situation. The drain blockage can be released with simple tools such as plunger, rag and even a closet hanger.

When we have problem of clogged toilet, the plunger is the best and most powerful tool to do the unclogging job quickly and efficiently. A toilet plunger has a rubber flange shaped to fit the bottom the clogged toilet bowl, this round shape block the pipe tunnel and creating high pressured vacuum inside the toilet pipeline. This high level vacuum will remove almost everything that is blocking the toilet. It is very simple to use the toilet plunger. You just need to insert the rubber flange deeply into the end of the toilet bowl. The next step is to move the plunger backward and forwards. Repeat this action few times until you successfully opened your clogged toilet.

Sometime we don?t have a toilet plunger, therefore we can try using a rag to fix our clogged toilet. The method is the same as the plunger technique. Take rag and wrap it until you get a shape of a ball. Then insert it to the bottom of the toilet bowl until it completely blocking the pipe. Next, use your hands to pump the toilet in a very similar way as you might use the toilet plunger until the toilet pipe is clear. The rag method to fix clogged toilet can be very dirty action as you must insert your hands deeply inside the toilet bowl and also the water might splash everywhere while trying to fix it.

How To Find A Reliable Plumber In Ipswich

When looking for a plumbing service wouldn?t you

Powered by WordPress Lab