Posts Tagged ‘Toilet Bowl’

How to Unclog a Toilet Without Calling a Plumber

How to unclog a toilet is one of the most common plumbing problems searched for on Google. The good news is that anyone can learn how to unclog a toilet without calling a plumber.

Article Body:

Toilets are one of the things those of us in modern society tend to take for granted, until they don’t work. Since most of us have eliminated the outhouse as an option (no pun intended), when our toilets don’t work things can get ugly in a hurry. The good news is that unclogging a clogged toilet is something anyone can learn to do.

There are a lot of different shapes and styles of toilets but, with a few exceptions, they all work about the same. Water is released from the tank (many commercial toilets use a special valve instead of a tank) into the bowl to flush the waste into your drainage piping. Basically pretty simple, right?

The two main problems that happen with toilets are the toilet running (the water not shutting off after flushing) and the toilet bowl plugged (not draining or stopped up). While a running toilet wastes water and can be annoying, if you have a toilet bowl plugged it’s a little more urgent. On a scale of 1 to 10, maybe a 12! In fact, one Google search term study calls most people’s #1 plumbing problem a plugged toilet.

Anyone can learn how to unclog a toilet. It just takes a little patience and the right tools. The first thing you need to fix a plugged toilet is a toilet plunger. These are a little different from a sink plunger, which looks like a rubber bowl on a stick.

A toilet plunger is designed specifically to direct the force into the waste outlet of the plugged toilet bowl. The business end of a toilet plunger looks sort of like a ball with an opening to fit into the waste outlet of the toilet. One type that is very effective has an accordion like design and is all plastic, including the handle.

The way a toilet plunger works is by filling up with water and then pushing that water through the stopped up drain. When unclogging a clogged toilet, the idea is to plunge up and down a couple of times so the plunger fills with water and then jam the open end, sometimes called a force cone, into the waste outlet in the plugged toilet and start plunging. You may have to pump the plunger up and down several times to clear the blockage.

When you are learning how to unclog a toilet you may need to be fairly aggressive with the plunger. The key is to force the water in the plunger through the waste outlet of the toilet, dislodging the blockage in the process. If you don’t splash a little out of the bowl you probably aren’t plunging hard enough. Ever wonder why plumbers charge so much?

This will usually be all you need to do to fix a plugged toilet. Sometimes, however, a plunger just won’t do the trick. If you’ve plunged a while with no success you might need to try another approach. It’s time to pull out the closet auger.

A closet auger is a special tool that can be used to clear an especially stubborn plugged toilet. A closet auger has a short drain cable, or snake, inside a metal tube that is bent on the end to aim the cable into the waste outlet of a toilet bowl. The cable is just long enough to get through the toilet and is connected to a handle the same length. You can get one of these at your local hardware store for as little as $10.

The way to use a closet auger is to pull the handle all the way out, insert the business end into the outlet of the toilet bowl that’s plugged and crank it down into the bowl, making sure the cable goes into the drain. When the bowl drains, flush the toilet while you’re pulling the cable back to help clean the cable. It’s a good idea to flush some toilet paper through a couple of times before you put your auger away just to be sure.

With the growing focus on water conservation more and more communities are requiring toilets that use less water per flush. In spite of the best efforts of the toilet manufacturers to increase performance, this is likely to continue to make our most common plumbing problem a plugged toilet. So you might as well go ahead now and learn how to unclog a toilet yourself. You’ll be glad you did.

Bryan Stevens is a Licensed Master Plumber with a knack for teaching

homeowners how to do their own basic plumbing repairs themselves. He has an amazing mini-course

called “How To Unclog A Toilet And Other DIY Plumbing Tips”. To claim your FREE copy,

visit: How To Unclog A Toilet

Guide to Installing a New Toilet

One of the most time-consuming bathroom jobs for a plumber is that of a complete toilet installation. While plumbers are good at it and have certainly got a lot of experience under their belts, there are many do-it-yourselfers who take this challenge. And if you ask me, it’s not really that difficult as it seems, especially if you know what each part is for and where it would go. This article will guide you through a complete toilet replacement in some easy-to-remember steps.

For simplicity, this article will discuss only those toilets that come with a separate tank that is installed above the toilet bowl. If you have got any instructions manual from the manufacturer, this would be the time to go through it thoroughly. And it’s always better to have an illustrated diagram of the parts with you.

To begin with, turn off the water supply to the tank and flush it twice to make sure that all the water goes down the drain. To promote safety, use a sponge to dry leftover water remaining in the tank or bowl.

Open the nuts and bolts that connect the tank with the bowl and the water supply line. Upon doing that, it will be easy to remove the tank. In case there is an elbow between the tank and the bowl, you will need to remove that first. Then, open the screws that are used to mount the tank to the walls. Do this step with extra care and hold the tank tightly in you hands, so that it doesn’t fall when detached from the wall.

Now you have to remove the bowl, which is attached to the floor with some nuts and bolts. These bolts are usually hidden under caps, which you can take off by inserting a screwdriver beneath the caps and pushing them in the upward direction. The screw-driver can be wrapped in protective tape so that it doesn’t damage the smooth surface of the toilet-bowl. Following the removal of the cap and nuts, the toilet bowl will be secure in its spot because of a seal with the floor. So rock it back and forth slowly and the seal would eventually break. Now you can take the bowl wherever you want but it would be a small weightlifting exercise.

Once the bowl is removed from its place, the toilet flange will be in the open. Shove some old, abandoned clothes inside so sewer gases would not escape into your house; This also insures that removable parts don’t come off the flange. Now bring the new toilet and get ready to install it; you will just need to put everything back in its place in the reverse order.

Take out the clothes from the flange and apply some plumber’s putty to the bottom of the bowl, where it will come into contact with the floor. Now place the bowl such that its outlet would come exactly above the flange. The bolts won’t fit in their place if you place the bowl wrongly. Once you have put it correctly into its position, ensure that it is in level with the floor. Next, place the bolts and nuts where they belong and adequately tighten them. Put the caps on the bolts and viola – the new toilet is now in ideal shape. Next, line the tank up with the wall and put everything else in place in exact reverse order you removed it before. Now wash your hands, clean up the mess, and welcome your brand new toilet!

Need more information on toilets and plumbing fixture installation? Read more articles by Scott Rodgers, master plumber, at http://eLocalPlumbers.com

How to fix clogged toilet

Clogged toilet is a big issue we all want to avoid. The knowledge of how to deal with clogged toilet can help you very much in saving lot of money and frustration. There are several hardware tools that can be found at any store and will help you in solving your clogged toilet situation. The drain blockage can be released with simple tools such as plunger, rag and even a closet hanger.

When we have problem of clogged toilet, the plunger is the best and most powerful tool to do the unclogging job quickly and efficiently. A toilet plunger has a rubber flange shaped to fit the bottom the clogged toilet bowl, this round shape block the pipe tunnel and creating high pressured vacuum inside the toilet pipeline. This high level vacuum will remove almost everything that is blocking the toilet. It is very simple to use the toilet plunger. You just need to insert the rubber flange deeply into the end of the toilet bowl. The next step is to move the plunger backward and forwards. Repeat this action few times until you successfully opened your clogged toilet.

Sometime we don?t have a toilet plunger, therefore we can try using a rag to fix our clogged toilet. The method is the same as the plunger technique. Take rag and wrap it until you get a shape of a ball. Then insert it to the bottom of the toilet bowl until it completely blocking the pipe. Next, use your hands to pump the toilet in a very similar way as you might use the toilet plunger until the toilet pipe is clear. The rag method to fix clogged toilet can be very dirty action as you must insert your hands deeply inside the toilet bowl and also the water might splash everywhere while trying to fix it.

Seyego online marketing, SEO and web design
Seyego web design and SEO Coupon Codes

Powered by WordPress Lab