Posts Tagged ‘water heater’

Winter’s approaching – check your plumbing!

As the leaves start to change color in many regions of America, and temperatures slowly dropping, it may be time to think about your plumbing. Live in an area that reaches freezing temperatures during the winter puts your plumbing at risk for freezing pipes and crystallized water. Here are some easy tips that can greatly lower the chance of plumbing problems during those cold winter days.

Insulate your exposed pipes! These include your garage or basement. A layer of insulation, either by pipe insulation, rags, or newspaper, will provide protection for those unprotected pipes.

If you know that a hard freeze is in the near future, leave your faucets trickling! It may sound a bit wasteful, but it makes all the difference. Doing this helps to halt any water in your pipes from freezing and clogging with icy blocks.

Keep the cabinet doors under your sink open! This allows the warmth of your home to flow around the pipes, keeping them from freezing.

Uphold maintenance to your water heater! Water heaters work harder than normal during the winter, providing you with warm water. Without proper upkeep, they can develop buildups that lead to corrosion. Definitely not optimum during the cold months.

Keep outdoor water faucets off and disconnected! Since these are obviously outside, they are more susceptible to the frost. Keeping water from flowing through them will keep them from freezing over, and wrapping rags around them can add extra protection.

Make an appointment with your plumber! Inspecting your pipes for leaks before the cold sets in can dramatically reduce or even prevent later damage. Take care of imperfections now and avoid spending hundreds of dollars later in plumbing replacement come spring when the pipes are thawed.

Advice from a Plumber: Water Heater 101

Let’s be honest, your water heater probably is not something to comes to mind at different points of the day. As long as you have hot water when you turn on the shower or washing machine, everything is fine. Panic and frustration does not set in until you turn on the hot water and get nothing but cold water in return.

So here is a quick lesson in Water Heater 101 – a few things you may not know about your water heater.

Your water heater is an appliance with a tank where water is heated and stored. Heating is accomplished by either a gas or electric heating unit under the tank. As we discussed, the most obvious problem with water heaters is when there is a lack of hot water. But there can be even bigger problems. If it is not properly installed, a water heater can easily flood a home. Water heaters can also cause fires if installed improperly. They can even explode. Don’t believe a water heater can pack a punch? Go to YouTube and watch one of the many videos of exploding water heaters. The Discovery Channel’s MythBusters even dedicated an entire episode to the issue.

It is recommended that a water heater in the garage be installed off the floor to reduce the potential for fire or explosion. The reason this is a bigger concern in the garage is because there are, oftentimes, combustible liquids there that can leak. In older homes, a device can be installed that shuts off the gas when the water heater temperature hits a certain degree. In addition, an expansion tank or exterior pressure relief valve must be installed to prevent pressure build-up in the plumbing from rupturing pipes, valves or the water heater.

The bottom line is water heaters are nothing to mess around with. Make sure yours is properly installed and maintained!

If you are looking to find the best deal on San Antonio plumbing, then visit Mr. Plumber’s site to find the best advice on a new water heater.

How a Water Heater Anode Works

In case you’re a DIY-type you might well have heard the term water heater anode-and wondered what on earth is it as well as what does it do in a water heater.

Here is a beginner’s guide to water heater anodes, and how to know when it’s time to replace them.

What it Is

Although a water heater anode is a very simple device, it does a lot of work on a daily basis during the cold season. (Just imagine it locked into position somewhere inside the top portion of the home water tank.)

When ever the water-heating switch is turned on, it has to accomplish the process of rising the temperature of the water to boiling point.

Without these, the homeowner will have to make use of an external burner to heat up the bottom of the tank, which is not merely impractical or even time consuming; it is additionally unsafe.

When Something Goes awry

Anode rods are made up of magnesium or even aluminum. With its fundamental construction akin to a walking cane or even sometimes a baseball bat, it is difficult to imagine how it performs its task very rapidly.

After all, no individual in the house has to wait for hot water to be dispensed. If he or she has to, then there is something wrong. A plumber needs to be called quickly, or the lack or absence of hot water can cause a catastrophe especially during the peak of winter.

When to Substitute a water heater anode

Surprisingly, it only takes one rod to heat up a residential tank. Indeed, there is no Plan B, or spare rod. For industrial purposes, tanks normally have two anodes, but neither one of these is a spare.

Both have to carry out the task of heating the water efficiently. Typically, the water heater anode has to be replaced every three to four years, however this time frame could depend on a whole lot of factors just a few of which are the hardness of the water as well as its level of salinity.

Do It Yourself

To achieve best results, it is best to examine the condition of the rod every few years. Extreme corrosion of the metal would mean contacting a trusted plumber instantly.

When one has the time and the handyman capability, however, it should be safe to try to replace the mechanism on one’s own. Just follow the general rules of electricity to avoid electrocution, such as turning the machine off completely or never touching the water.

A water heater anode is extremely cheap, with the most expensive type being in the range of forty US dollars. The homeowner could stress out more about the plumber fee, which can be as high as $300.

Given enough time as well as handyman training, industrious individuals ought to be able to achieve the task without fail.

Looking to find tips for mending your water heater anode, then visit http://marathon-water-heaters.com to find the best advice on locating a great deal on a water heater and tips for fixing your existing water heater.

Your Guide to the Indirect Water Heater

The term indirect water heater may not sound that sexy, but these heating systems can drastically reduce your energy bills–and put more money in your pocket.

If you’re planning to get a different water heater or just want to know much more about this type of popular home purchase, here’s every little thing you might want to know before purchasing an oblique water heater.

What’s an Indirect Water Heater?

An indirect water heater is actually an energy environment friendly water heating system that’s fueled by a home’s space heating system.

Conventional water heaters use a storage tank and gas or electricity to heat water. Outlets on the top allow hot water to escape when hot water faucets are in use and an input pipe on the bottom adds cold water to the tank.

The storage container is constantly on, heating and reheating the water. With this particular methodology, you could waste lots of energy even when you’re not using hot water. This particular process is known as standby heat-loss.

Indirect water heaters considerably lower the amount of stand by heat loss, and are actually due to this fact much more power efficient.

Positives and the negatives

An indirect water heater heats water by passing it through a heat exchanger in a boiler. The hot water is then pumped into a water storage container.

Since the boiler doesn’t have to be operated regularly, this specific technique is certainly efficient; an indirect water heating system works the best with an efficient boiler.

In fact, the combination can provide one of the cheapest forms of water heating available. Indirect heaters may cost more initially, but their life cycle is the lowest of most other heaters.

Tips on how to Purchase

An indirect water heating system could be attached to a heat boiler, solar heating system, electrical energy, or gas.

The initial cost really depends on the amount of work it will take to install it to your space heating system. Minus the cost of installation, a regular indirect water heater can cost anywhere from 900 to 1500 dollars.

It’s best to select the heater based mostly on your capacity needs. The smaller the capacity, the more affordable your preliminary expenses would be. Keep in mind, an initial expense in a heater that would pay off over the long run is a great investment.

Want to find out how to find an indirect water heater at a great price, then visit http://marathon-water-heaters.com for more info on how to choose the best water heater for your needs.

Marathon Water Heaters Buying Guide

Marathon water heaters have a great reputation for durability and efficiency. (I know I cut my water bill close to half after getting one.)

Yet before you plunk down your hard-earned cash on a huge mammoth water heater that costs thousands of dollars here are some suggestions for buying a water heater that fits your needs.

Tip No.1: Go Small (ish)

For those single bachelors out there you won’t need a lot of hot water. (Unless you’re my college-age son.) A water heater with a 20-30 gallon tank should suffice.

Entry-level heaters such as the Rheem MR20120 Marathon water heater–with a 20 gallon tank– are perfect for studios with their small size and super-efficient output.

Tip: IF you’re planning on having your girlfriend or move in, or maybe the rest of your band, you might want to plan ahead and get a bigger water heater.

Tip No.2: It Takes Two

For those entwined in eternal love–or at least until you can get the security deposit figured out–a 30-50 gallon water heater is ideal. A fantastic option is the Rheem MR40245 Marathon heater which boasts a huge tank–and a 4500 watt element.

It’s also got a 1st-hour factor of 52, making it very competitive in its class.

Ideal for keeping you warm on those long romantic showers.

Suggestion No.3: It’s a Family Affair

Throw in some munchkins and you’ll require more hot water. A good rule of thumb is 3 or 4 people living together need a water heater with a 50-85 gallon capacity.

So your kids have enough water to wash up–and play with their water toys–go with the Rheem MR85245 Marathon water heater.

With a 4500 watt element rating, and 85 gallon tank, this water heater will take care of your family’s entire water needs.

So if you want to save money on a water heater, both now and later, go with a marathon model. Just be sure you plan for what you need now–and what you might need down the road.

Looking to find the best deal on a marathon water heater, then visit http://marathon-water-heaters.com to find the best advice on locating a great deal on a water heater.

Denver Drain Cleaning Quality 1st Plumbing

Hot water, clear drains. Quality 1st Plumbing, serving the greater Denver area, is a family plumbing business that cares about your family’s comfort. Always available at any hour of any day, their factory-trained technicians provide drain cleaning, toilet replacement, sewer inspection and more with green solutions available because their family is looking out for the comfort of families all over the globe. Visit us www.yellowpages.com

Simeone Plumbing, Inc. Sonoma County Emergency Plumbers

Plumbing emergency? Call for fast and friendly service from Simeone Plumbing, Inc. Serving all of Sonoma County, California, this team of expert plumbers can fix any residential or commercial plumbing system PRONTO. Service is available 24/7. Visit us www.yellowpages.com

Seyego online marketing, SEO and web design
Seyego web design and SEO Coupon Codes

Powered by WordPress Lab